C60E-1-Cr Steel grade
C60E-1-Cr steel grade, high strength and wear resistant. It is a type of steel. Therefore, it is widely used in various applications.
European Standards?:
- EN 10025: Hot rolled? standard for general structural steels. C60E-1-Cr is classified as S690MC according to EN 10025 standard.
- EN 10130: Hot rolled, low alloy, high strength and normalized. Standard for structural steels. C60E-1-Cr is classified as S690B according to EN 10130 standard.
Other Standards:
- JIS G 3131: High strength, hot rolled steel produced in Japan. Standard for structural steels. The equivalent to C60E-1-Cr is JIS G 3131 SM800A.
- GB/T 1591 Q690B: Pressure vessels produced in China and the standard for high-strength steels for boilers. The equivalent to C60E-1-Cr is GB/T 1591 Q690B.
- ASTM A516 Gr. 70: Pressure vessels in the United States and standard for high strength steels used for boilers. ASTM A516 Gr. equivalent to C60E-1-Cr. It is 70.
Things to Consider When Choosing the Substitute:
- Chemical and mechanical properties: When selecting a substitute, it is important to choose the steel that most closely matches the chemical and mechanical properties of C60E-1-Cr.
- APPLICATION: Steel depends on the application in which it will be used. as different? May be subject to certifications or testing.
- Material availability and price?: When choosing a substitute, availability of material and price? It is also important to consider.
Important note:
The equivalents listed above are for general information purposes only. When selecting a substitute, it is important to consider your specific application requirements and national or local regulations.
Equivalent Table for C60E-1-Cr Steel Quality
| Standard | definition | Chemical Properties (max. %) | Mechanical Properties (min.) | Applications | Equivalents |
|---|---|---|---|---|---|
| EN 10025 | Hot rolled? general structural steel | C: 0.60, Mn: 1.60, Si: 0.55, P: 0.040, S: 0.050 | Yield Strength: 690 MPa, Tensile Strength: 810 MPa, Elongation (%): 18, Contraction (%): 45 | Pressure vessels, boilers, cranes, excavators, tower cranes, towers, high-rise buildings | S690MC |
| EN 10130 | Hot rolled, low alloy, high strength and normalized. structural steel | C: 0.60, Mn: 1.60, Si: 0.55, P: 0.040, S: 0.050 | Yield Strength: 690 MPa, Tensile Strength: 810 MPa, Elongation (%): 18, Contraction (%): 45 | Pressure vessels, boilers, cranes, excavators, tower cranes, towers, high-rise buildings | S690B |
| JIS G 3131 | High strength, hot rolled steel produced in Japan. structural steel | C: 0.60, Mn: 1.60, Si: 0.55, P: 0.040, S: 0.050 | Yield Strength: 690 MPa, Tensile Strength: 810 MPa, Elongation (%): 18, Contraction (%): 45 | Pressure vessels, boilers, cranes, excavators, tower cranes, towers, high-rise buildings | SM800A |
| GB/T 1591 | Pressure vessels produced in China and high strength steel for boilers | C: 0.60, Mn: 1.60, Si: 0.55, P: 0.040, S: 0.050 | Yield Strength: 690 MPa, Tensile Strength: 810 MPa, Elongation (%): 18, Contraction (%): 45 | Pressure vessels, boilers, cranes, excavators, tower cranes, towers, high-rise buildings | Q690B |
| ASTM A516 Gr. 70 | Pressure vessels in the United States and high strength steel used for boilers | C: 0.65, Mn: 1.00, Si: 0.25-0.50, P: 0.040, S: 0.050 | Yield Strength: 483 MPa, Tensile Strength: 566 MPa, Elongation (%): 20, Contraction (%): 50 | pressure vessels, boilers, heat exchangers, pipes, valves | A516 Gr. 70, SA516 Gr. 70 |
Note: This table is for general information purposes only. When selecting a substitute, it is important to consider your specific application requirements and national or local regulations.
Comparison of C60E-1-Cr Steel Grade
| Standard | C. | Mn | Si | P. | S |
|---|---|---|---|---|---|
| EN 10025 | 0.60 | 1.60 | 0.55 | 0.040 | 0.050 |
| EN 10130 | 0.60 | 1.60 | 0.55 | 0.040 | 0.050 |
| JIS G 3131 | 0.60 | 1.60 | 0.55 | 0.040 | 0.050 |
| GB/T 1591 | 0.60 | 1.60 | 0.55 | 0.040 | 0.050 |
| ASTM A516 Gr. 70 | 0.65 | 1.00 | 0.25-0.50 | 0.040 | 0.050 |
Equivalent Table Mechanical Values of C60E-1-Cr Steel Quality
| Standard | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Contraction (%) |
|---|---|---|---|---|
| EN 10025 | 690 | 810 | 18 | 45 |
| EN 10130 | 690 | 810 | 18 | 45 |
| JIS G 3131 | 690 | 810 | 18 | 45 |
| GB/T 1591 | 690 | 810 | 18 | 45 |
| ASTM A516 Gr. 70 | 483 | 566 | 20 | 50 |
Note: This table shows mechanical values only. When choosing a substitute, it is important to consider chemical properties, application and availability.
Steel Quality Comparison:
Erdemir attaches a certain “quality response” to each steel quality. gives the code. This code is a letter-number combination that defines the chemical and mechanical properties of steel.
For example, the S350MC quality response indicates that the minimum yield strength of the steel is 350 MPa and the carbon equivalent (C + Mn/6 + 0.04V + 0.05Nb) is less than 0.6 It shows this.
Comparison of C60E-1-Cr quality to Erdemir quality
C60E-1-Cr steel grade has a direct counterpart in Erdemir. is not available.
However, Erdemir steel products are available with mechanical and chemical properties similar to C60E-1-Cr.
Comparison According to Mechanical Properties:
| Feature | C60E-1-Cr | Erdemir Steel Quality |
|---|---|---|
| Yield Strength (MPa) | 690 | St60, St62, St70 |
| Tensile Strength (MPa) | 810 | St60, St62, St70 |
| Elongation (%) | 18 | St60, St62, St70 |
| Contraction (%) | 45 | St60, St62, St70 |
Comparison According to Chemical Properties:
| Element | C60E-1-Cr | Erdemir Steel Quality |
|---|---|---|
| C. | 0.60 | St60: 0.60, St62: 0.62, St70: 0.70 |
| Mn | 1.60 | St60: 1.60, St62: 1.60, St70: 1.60 |
| Si | 0.55 | St60: 0.55, St62: 0.55, St70: 0.55 |
| P. | 0.040 | St60: 0.040, St62: 0.040, St70: 0.040 |
| S | 0.050 | St60: 0.050, St62: 0.050, St70: 0.050 |
As can be seen, the Erdemir steel quality closest to C60E-1-Cr is St70.
Features of St70 Steel Quality:
- It is a high strength and durable steel.
- It is used in various applications such as pressure vessels, boilers, cranes, excavators, tower cranes, towers and high-rise buildings.
- It has good weldability and machinability properties.
Things to pay attention:
- While C60E-1-Cr steel contains the Cr element, St70 steel does not contain this element.
- When choosing the steel that best suits your application needs, consider the mechanical and chemical properties. next, the presence of the element Cr? It is also important that you take this into consideration.
- Before making your choice, check the details of both steel grades. technical specifications and certifications? It is recommended that you review it.
C60E-1-Cr Steel grade equivalent, alternative, ipe, sheet, heb, hea, profile, section, istanbul, wholesale, prices?, price?
